16GB (8GB 2Rx8 1G x 72-Bit 2 pcs.) PC3-10600E CL9 240-Pin ECC DIMM Kit

Product Conditie Refurbished hardware, gebruikt en getest
Part Number KVR1333D3E9SK2/16G
Memory Size 8GB
Data rate (MT/s) 1333
Memory module name PC3-10600E
Memory rank 2Rx8 (Dual Rank)
Memory ECC ECC Server memory, niet geschikt voor normale PC of laptop. Verkeerd besteld geheugen kan niet worden geretourneerd
Product ID 7933

Beschikbaarheid: Dit product is binnenkort (weer) leverbaar.

Excl. BTW: € 99,95 Incl. BTW: € 120,94

- HP Proliant G6 en G7 servers*
- Dell PowerEdge R410, R610, R710, R910 enz.*
- Dell Precision T6100, R5500, T5500, T7500 enz.*
- IBM Systems X3850 X5, X3950 X5, X3690 X5, X3250 M3, X3200 M3 *
- And more ....

KVR1333D3E9SK2/16G

More Views

  • KVR1333D3E9SK2/16G

Extra informatie

Minimale afname 1
ServerHome.nl Garantie Dit product wordt geleverd met standaard ServerHome.nl garantie
Product Conditie Refurbished hardware, gebruikt en getest
Part Number KVR1333D3E9SK2/16G
Memory Size 8GB
Data rate (MT/s) 1333
Memory module name PC3-10600E
Memory rank 2Rx8 (Dual Rank)
Memory ECC ECC Server memory, niet geschikt voor normale PC of laptop. Verkeerd besteld geheugen kan niet worden geretourneerd

Details

DESCRIPTION

ValueRAM's KVR1333D3E9SK2/16G is a kit of two 1G x 72-bit (8GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, ECC memory modules, based on eighteen 512M x 8-bit FBGA components per module.
Total kit capacity is 16GB. The SPD's are programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers.
The electrical and mechanical specifications are as follows:


FEATURES

  • JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
  • VDDQ = 1.5V (1.425V ~ 1.575V)
  • 667MHz fCK for 1333Mb/sec/pin
  • 8 independent internal bank
  • Programmable CAS Latency: 9, 8, 7, 6
  • Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
  • Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
  • 8-bit pre-fetch
  • Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
  • Bi-directional Differential Data Strobe
  • Thermal Sensor Grade B
  • Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
  • On Die Termination using ODT pin
  • Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
  • Asynchronous Reset
  • PCB: Height 1.18” (30mm), double sided component

U bent wellicht ook geïnteresseerd in de volgende producten:

One moment please, your page is loading...